The Strengths and Weaknesses of Different Roof Coating Types

Posted on January 15th, 2020 by Applied Roofing Services

A roof coating is important to protect the roof and extend its lifetime. It increases UV protection for the roof to fight against the harmful sun rays, limits contraction and expansion cycles that lead to premature failure of the underlying membrane and prevents ponding water. A roof coating is a more cost-effective option than replacing a roof. However, before getting coating done on your roof, you should consider its location, condition, slope, and exposure to heat, chemicals, and UV rays.

best rated roof coating

There are various roof coating types available to choose from. You need to compare the strengths and weaknesses of various roof coatings to determine the best coating type for your roof.

Here are the pros and cons of coating types:

1. Acrylic Roof Coatings

The acrylic coating is the best choice for those who want a cost-effective roof coating. It is a water-based coating, which remains an ideal option for different types of roofs. They are available in different colors, suitable for most climates, and provide the best value.

Strengths
Acrylic roof coatings:

  • UV resistant, highly reflective, and easy to work with
  • Offer an excellent balance of performance and cost

Weaknesses
Acrylic roof coatings:

  • May not perform well in ponding-water situations
  • Will lose mil thickness with weathering
  • Should be applied at 50°F or above

2. Silicone Roof Coatings

Silicone roof coating is water-repellent or waterproof. It is often used if the roof experiences excessive amounts of water or where rain is a common occurrence. In some applications, silicone coatings eliminate the need for a primer.

Strengths
Silicone roof coatings:

  • Resistant to weather and corrosion
  • Good in ponding water situations
  • Do not get brittle or hard

Weaknesses
Silicone roof coatings:

  • Lose reflectivity over time
  • Should be used with a fabric, as they do not have the same resistance to tearing like other coatings materials
  • Hard to adhere to other roofing products, so when re-coating the roof, you should either remove the existing coating or use a coating material that is compatible with silicone

Also Read – How to Find the Best Roof Options for Commercial Roofing

3. Polyurethane Roof Coatings

Polyurethane roof coatings are impact-resistant and handle foot traffic precisely than other roof coatings. They come in two types including aliphatic and aromatic roof coatings. Aliphatic roof coatings are expensive, but they are UV stable, remain cleaner, and hold color well. Aromatic coatings are less expensive, but they are not UV stable, so they are often used as a base coating.

Strengths
Polyurethane roof coating:

  • With an aliphatic top coat and an aromatic base, it stays cleaner and is durable and resistant to ponding water than an acrylic coating
  • Keeps the roof cool, as it remains clean and white

Weaknesses
Polyurethane roof coatings:

  • More expensive than acrylic coatings
  • Can have a stronger odor than other roof coatings

Also Read – How Silicone Roof Coatings Help In Roof Maintenance

Looking for a roofing specialist in California? Call us at 714-632-8418, or contact us to get a free quote online today!

About Applied Roofing Services

Applied Roofing Services is a full service roofing company located in CA. We offer durable and high quality residential and commercial flat roofing. We provide roof installation as well as roof repair services, roof maintenance and inspection services. We specialize in low slope roofs, energy efficient, zero maintenance, and green roofing. We have 20+ years of experience in the roofing industry.


How to Beat the Heat with Cool Roof Coating

Posted on April 30th, 2019 by Applied Roofing Services

Roof coatings like spray polyurethane foam protect and extend the life of your roofing systems. Many people are not aware that their typical asphalt roofing system is heavily affected by the heat – the number one cause of roof failure. Once damaged, asphalt roofing systems lead to rising energy costs. Therefore, a cool roof coating is an excellent way to beat the heat because it provides a cool, energy efficient, and safe roof over your head.

Roof Coating

How to Beat the Heat with Cool Roofs?

You can effectively beat the heat with cool roof coating systems for your commercial property.
A cool roof prevents the sun’s heat from entering the building by reflecting the sunlight, back to the sky. Cool roofs can significantly reduce the building’s cooling burden in several climatic zones. A few well-known benefits of cool roofs to the building owner and occupants include:

  1. Increased comfort during the hot summer months
  2. Decreased use of air conditioning, leading to energy savings
  3. Reduced roof maintenance costs due to improved roof life
  4. Protection from ultra-violet light and harmful chemicals
  5. Environment-friendly materials used

Summer Roofing Safety Tips

Working in hot weather can be challenging for anyone. You may choose to check the condition of the roofing on your own. However, it can be a risky process so you should leave the job to experts. Here are some essential roofing safety tips that you should follow when working on or inspecting your roof this summer.

  1. Stay up-to-date on the local weather conditions
  2. Keep yourself properly hydrated
  3. Keep an eye on signs of heat-related illness
  4. Follow all the routine summer roofing safety measures
  5. Limit your work time in the sun

Contact us today to learn about our spray foam cool roofing service or to receive a free roofing estimate for your property.

Also Read: The Versatile Benefits of Spray Foam Roofing

About Applied Roofing Services

Applied Roofing Services is a full service roofing company located in CA. We offer durable and high quality residential and commercial flat roofing. We provide roof installation as well as roof repair services, roof maintenance and inspection services. We specialize in low slope roofs, energy efficient, zero maintenance, and green roofing. We have 20+ years of experience in the roofing industry.


Why Roof Flashing Is Important for Your Roof

Posted on October 12th, 2018 by Applied Roofing Services

Roof flashing is an essential component of a roof which needs to be installed correctly to ensure a long-lasting and waterproof structure. Flashing plays a significant role in protecting your roof and has a host of advantages that you might be unaware of. Here is an overview of why good quality flashing is required in roofing systems.

Roof Flashing

What Is Roof Flashing?

Roof flashing is a weatherproofing system for roofs that involves placing strips of waterproof material (generally metal) on gaps in your roof to help prevent water seepage. These strips of metal are fitted between the exterior roofing layer and the waterproofing film called felts. Flashing helps seal these off just like sealants and caulking do in the areas close to the windows and gutter seams. In addition to galvanized steel, materials like rubber and plastic, aluminum, and copper are also used by roofers.

The following are some of the common types of roof flashing:

  • Valley Flashing
  • Drip Edge
  • Vent Pipe
  • Step and Continuous Flashing

Why Roof Flashing Matters

Today, flashing is considered a vital construction practice, and it’s extensively used in commercial, residential and industrial buildings. Flashing plays a key role for several reasons including:

  • Without the right flashing, a roof could be susceptible to leaks, which reduces its lifespan significantly.

  • It provides additional protection from leaks in areas that are vulnerable to expansion, contraction or the accumulation of precipitation such as ice and snow.

  • It offers a waterproof barrier to the roof that accumulates water seeping through it and diverts it back out of the roof.

  • Flashing decreases the risks of leaks in the building interiors and also stops moisture related development of mold or damp.

  • The flashing membrane also stops insects from gaining access into the roof and cause damage to the roof structure.

  • Flashing delivers an aesthetic charm by outlining the roof edges to make them appear sleek, neat and polished.

Since flashing protects vulnerable parts of a roofing system, it normally makes sense to get it inspected regularly by roofing professionals to ensure that your flashing stays in shape.

Contact us today to get a complimentary roofing estimate quote or to learn more about our excellent roofing services!

About Applied Roofing Services

Applied Roofing Services is a full service roofing company located in CA. We offer durable and high quality residential and commercial flat roofing. We provide roof installation as well as roof repair services, roof maintenance and inspection services. We specialize in low slope roofs, energy efficient, zero maintenance, and green roofing. We have 20+ years of experience in the roofing industry.


4 Tips to Help You Obtain the Best Roofing Estimate

Posted on February 12th, 2018 by Applied Roofing Services

Simply put, a roofing estimate quote refers to a document that contains a breakdown of the overall cost of your roofing work. As a responsible property owner, you know the value of comparing the various roofing quotes to find the best bargain on a roofing project. But the actual process of getting the best roofing estimate can be challenging and arduous for you.

Best Roofing Estimate

A roofing estimate should include these details:

  • Complete work schedule for a roofing project
  • Names and duties of the roofing contractors involved
  • Complete inventory list, inclusive of individual prices
  • Payment methods and due dates
  • Skills and manufacturer warranty
  • Expiration clause mentioning the specific terms for ending the contract

Here’s a list of easy tips to help you proceed smoothly towards getting the best roofing estimate:

  1. Acquire At Least Three Roofing Estimates

    To receive the best value for your investment, a good practice would necessitate having at least 3 roof estimates for comparison. This will not only help you assess a company based on cost, but also the aspects such as:

    • Roofing material quality
    • Insulation thickness
    • Duration of warranty
    • Company’s experience in business
    • Clean-up work efficiency after the roofing job
  2. Have Your Roof Inspected

    Schedule an appointment with each roofing contractor respectively. Allow them to inspect your roof and observe what condition it’s in. After this, you should ask them the important questions about shingle layers removal, underlying damage, a mark of water damage in chimneys, skylights, cost of repairing the roof, and etc.

  3. Determine Actual Material Cost

    Ensure to get the roofing estimates that specify the labor and the materials costs separately. This will help you to compare and verify the quoted figures for overall accuracy. You should also verify whether all the quotes are referring to the similar materials or not and check the quantity.

  4. Analyze Their Level of Professionalism

    Did a contractor give you the requested estimate on time, as per the commitment with you? Failing to honor the commitment would hint at their lack of professionalism and work ethics. Find contractors that stay true to their commitment. A bad work ethic can impact the results you would expect out of your commercial or residential roofing project.

 
Get a Free Roofing Quote

About Applied Roofing Services

Applied Roofing Services is a full service roofing company located in CA. We offer durable and high quality residential and commercial flat roofing. We provide roof installation as well as roof repair services, roof maintenance and inspection services. We specialize in low slope roofs, energy efficient, zero maintenance, and green roofing. We have 20+ years of experience in the roofing industry.


5 Benefits of Tile Roofing in Southern California

Posted on January 31st, 2018 by Applied Roofing Services

You will notice that incorporating a tile roofing in your home exterior, is the simplest and most effective means to complement your lifestyle and enhance the value of your home. Conventional roofing tiles were manufactured using slate or fired clay product, but the contemporary varieties are made from concrete.

Roofing tiles are accessible in numerous styles, each with its individually desired applications and intrinsic appearance. But there’s a lot more to them that makes them so appealing to homeowners.

Tile Roofing

Tile Roofing in Southern California

Warmer climates in southern California, necessitate homeowners to make alterations to make up for the soaring temperatures without giving up comfort or style. Not having the proper roofing type for the climate can produce high energy bills. There are a few simple ways to overcome the situation, and the most crucial one is the selection of roofing materials for a hot climate. Tile roofing is an ideal choice for roofs that undergo exposure to hot weather or salty air. This is the reason why the residential homeowners and builders in southern California frequently prefer tile roofing.

Advantages of Tile Roofing

Regardless of the material you select, there are several benefits of installing tile roofing that include:

  1. Long-Lasting
    In suitable climates, with correct building design and installation, a tile roof is capable of lasting more than 100 years. This is why most roof tile manufacturing companies provide warranties of minimum 50 years.

  2. Weather, Insect & Rot Resistant
    Tile roofs do not decay in moist climates and are resistant to destructive pests. They can resist the most intense weather situations, including fire, wind, hail, and snow. Clay tile is tolerant to salty air corrosion, making it a perfect choice for regions like southern California.

  3.  Also Read:  5 Types of Roofs Considered the Best for Southern California
  4. Diverse Styles
    Roofing tiles are popular for their enhanced durability and exotic look and are available in many different styles to fit into any home style, from Medieval to Modern European. They are accessible in diverse colors and shapes including curved, flat, interlocking, or fluted.

  5. Eco-Friendly & Energy Efficient
    Since they are made using earth minerals, minus the chemicals, both clay, and concrete tiles do not exhaust the precious natural resources. That’s why they can be recycled and reused, after they turn old. The roof tiles possess superior thermal capacity that helps them to suitably adjust indoor temperatures. This makes them energy efficient by saving electricity.

  6. Low Maintenance
    Under regular conditions, roofing tiles involve minimal maintenance. Leaks are nearly unheard of, and it is quite uncommon for tile roofs to necessitate repairs or extra care unless they rupture due to a massive impact.

At Applied Roofing, we deliver superior roofing services in Los Angeles, CA. Our full-service roofing work ranges from roof repair service to home roof repair. We are committed to providing the most professional and inexpensive roofing solutions in southern California.

About Applied Roofing Services

Applied Roofing Services is a full service roofing company located in CA. We offer durable and high quality residential and commercial flat roofing. We provide roof installation as well as roof repair services, roof maintenance and inspection services. We specialize in low slope roofs, energy efficient, zero maintenance, and green roofing. We have 20+ years of experience in the roofing industry.


Debunking Common Myths Related to Attic Vents

Posted on August 14th, 2017 by Applied Roofing Services

Your attic ventilation plays an important role in maintaining the indoor air quality. However, there are many myths around attic ventilation due to which people overlook the benefits of attic ventilation. Understanding the benefits of attic ventilation will help you keep your home and roof in good condition.

Attic Vents

Here are some myths and facts about attic ventilation that you should know:

Myth: Attic Vents Release Warm Air from Your Home in the Winter
Fact: Many people believe that as warm air rises and tries to escape through attic space, ventilating your attic will help in releasing warm air during the winter and reducing heating efficiency. However, this is not true because if heat is escaping, it means you require better attic insulation and not less ventilation.

Myth: Attic Vents Are Only for Warmer Climates
Fact: People believe that roof ventilation increases energy efficiency during warmer climates but there are also other factors such as shingle color, insulation and sun exposure that affect energy efficiency. Attic vents are actually more useful in colder climates. It prevents moisture damage that applies more to colder climates.

Myth: More Attic Ventilation Is Required
Fact: You need the right amount of ventilation for your home. Less ventilation can cause moisture problems in winter and decrease energy efficiency in the summer but more ventilation can be bad too. Talk to an experienced roof contractor to know how much ventilation your home requires.

Myth: Every Attic Needs One Best Ventilation Method
Fact: Many researches have ascertained the ventilation method for every attic. However, this doesn’t work in practice. There’s no rule to determine the optimal ventilation design for any attic. Every attic has different needs, so only an experienced roofing professional can help you select the best ventilation method after assessing your attic’s needs.

Myth: The Existing Ventilation Method is Enough
Fact: Many people assume that while building their homes, the professionals choose the best ventilation method. However, it’s possible that they might have installed just the bare minimum ventilation required. So it’s important to get this checked by a trusted and experienced roofing contractor.

Avoiding these common myths will help you get the optimal ventilation for your attic!

About Applied Roofing Services

Applied Roofing Services is a full service roofing company located in CA. We offer durable and high quality residential and commercial flat roofing. We provide roof installation as well as roof repair services, roof maintenance and inspection services. We specialize in low slope roofs, energy efficient, zero maintenance, and green roofing. We have 20+ years of experience in the roofing industry.


Types of Rain Gutter: Choose Which Best Suits Your Home

Posted on July 26th, 2017 by Applied Roofing Services

Rain gutters are very important to protect your house from the elements gathering on top of your roof. A properly installed gutter helps in routing the runoff from a very high surface like roof to proper drainage away from the house. This helps in keeping your house high and dry while protecting your siding, window panels, doors and other foundations of your house from water damage.

As you can see, rain gutters are very important for proper upkeep of your house. Therefore, choosing the one amongst different available materials and designs is much more important.

Rain Gutter

Here’s a list of common gutter materials and benefits related to them, keeping in mind all the important details before you choose a specific gutter for the house.

Vinyl Gutters
These have become a popular option for rain gutter installation among most of the home owners. This is because of its cheap price, ease of installation and rust free elements. Its lightweight and easy snapping sections make it really easy to maintain. A properly installed gutter functions really well in every climate, just like other materials. Though these gutters grow brittle and crack under extreme cold conditions, they are a really good choice if you are looking for a new one while hanging on to a tight budget.

Wood Gutters
These gutters are usually made of cedar, redwood or fir, but due to the advent of cheaper mass produced materials, wood gutters have dropped out of favor. The gutters which used to be a norm at some point of time are now most often used for renovation of historic houses where staying true to the building materials has gained much more precedence over durability. You need to be prepared with bundles of bill in case you are planning to install this classic gutter system to your house.

Stainless Steel
This material is almost indestructible, rust free and one of the most durable materials in the industry. The only concern related with this gutter material is its cost, which runs two-to-three times the cost when compared to other gutter materials. Get ready to shell out some more peanuts if you wish to go this route.

Aluminum Gutters
These gutters come in different qualities: one is the primary gutter which is thicker and made up of superior quality material, and the other one is secondary aluminum which is basically a byproduct of recycled materials. These are also very cost effective, lightweight, and rust proof as vinyl gutters. What makes them a preferable option over other materials is that they hold paint really well and stay intact even in adverse weather conditions, unlike vinyl fences.

Steel and Copper Gutters
Just like aluminum gutters, these gutters come in different qualities. But galvanized steel gutters are much more popular than their aluminum counterpart. It’s because of their competitive cost and much more sturdiness when it comes to the damage caused by falling branches and ladders. The only drawback of this is its rust factor which can be taken care of with proper maintenance. Copper gutters are one of the most beautiful gutter materials available in the market and just like stainless steel, they have longer durability. The only barrier with copper gutters is its price because they would win for sure if there’s a race of the most expensive gutter material.

Sectional or Seamless Gutters
The final thing that you need to consider is whether you’ll go for sectional joints or a seamless gutter. Most of these materials are available in sectional joints which are fastened when installed. However, aluminum gutters are available in seamless varieties, which is basically custom made to fit your house in one long sheet of metal. It is advised to go with seamless gutter, as sectional gutters fail after years of wear at joints and seams. While on the other hand, you wouldn’t face such problems with seamless gutters which makes it a popular choice for those who can afford a bit of extra dollars.

If you are looking for maximum savings or you’re more concerned about stunning looks, there’s a rain gutter out there to meet everyone’s need. Get in touch with a licensed contractor to ensure that your gutters are installed properly and find out which gutters suit your house and budget the best.

About Applied Roofing Services

Applied Roofing Services is a full service roofing company located in CA. We offer durable and high quality residential and commercial flat roofing. We provide roof installation as well as roof repair services, roof maintenance and inspection services. We specialize in low slope roofs, energy efficient, zero maintenance, and green roofing. We have 20+ years of experience in the roofing industry.


Why You Should Invest in a High-Quality Roofing System?

Posted on March 15th, 2017 by Applied Roofing Services

If your rooftop has withered away by the extremes of the weather and you’re considering a facelift, try giving it a quality solution this time so that it’s not only re-modeled, but its value as a property is also increased. High-quality roofing will not only look better than its cheaper counterparts but it will also offer a variety of design options that will work well with different home structures.

High-Quality Roofing System

Here are some benefits of investing in a high-quality roofing system:

A Better Look
Unlike their cheaper counterparts, these roofs are made up of industry standard high-quality materials which enhance their look in every possible way. Worked upon by industry professionals, they come in great customizable design options as per the demand of the size and shape of your house which helps in enhancing the overall look of your home.

Stronger and More Durable
Quality ensures strength and agility. The top-notch materials that are used in making these roofs ensure that your roof is able to hold on the adversities of the extreme weather and can endure for a long time. You can relax under your roof while rain, thunderstorms, or extreme heat fight against the odds of beating the heroic might of your sturdy roof.

Reduces Your Energy Expenses
Unlike its cheaper counterparts, a high-quality roofing system is not only strong and beautiful, but also energy-efficient. They act as good insulators that allow little or no heat, electricity, or sound to go into or out of it. This way it keeps your room temperature at a comfortable level which helps in reducing your energy expenses by a great level.

One-Time Investment
You can surely spend in a mid-level roofing system for your house which will definitely cost you less, but remember that it’s going to cost a lot on its repair maintenance works. Reason – the lower quality materials they use. However, a high-quality roofing system is a one-time investment. Once you install it, you are free from the hassles of keep digging your pocket regularly for the repair or maintenance works.

Adds Value to the Property
The property value of your house surely increases when it is protected by a strong roofing system with an attractive design. After all, who doesn’t want a beautiful house which not only looks good but also offers a feeling of safety with its strong and intelligent roofing system. So after a while when you move to another town, the increased resale value of your house will definitely help you in your next phase of settlement.

It Brings You Pride and Peace
Apart from all the utilitarian reasons mentioned above, one more reason to invest in a high-quality roofing system is the amount of mental peace that it offers. As it enhances the facade of your property by providing a well-structured and aesthetically pleasing home, it surely brings a sense of pride to you as a homeowner.

A high-quality roofing system doesn’t necessarily have to be a hole in your pocket. Companies like Applied Roofing Services, having 20+ years of experience in working with property managers and facility managers in designing custom-fit roofing solutions, are able to meet the needs and budget of their customers in providing energy-efficient, zero-maintenance roofing systems.

About Applied Roofing Services

Applied Roofing Services is a full service roofing company located in CA. We offer durable and high quality residential and commercial flat roofing. We provide roof installation as well as roof repair services, roof maintenance and inspection services. We specialize in low slope roofs, energy efficient, zero maintenance, and green roofing. We have 20+ years of experience in the roofing industry.


5 Major Benefits of Roof Coatings

Posted on February 27th, 2017 by Applied Roofing Services

You are well aware of the fact that your house and business need a sturdy and well-installed roof in order to avoid frequent roof repair or installation. But you might be unaware of the fact that applying a roof coating can increase the lifespan of the roof no matter when it was installed – recently or a decade back.

Benefits of Roof Coatings

Roof coating offers many benefits such as reduction of heat energy costs and increasing UV and waterproofing protection of your roof. Your roof is prone to damages caused by heat and ultraviolet rays, so adding roof coating strengthens your roof and increases its longevity. It also adds to the charm and appearance of your house.

Here are 5 major benefits of roof coatings:

  1. Reduction in the Cooling Bill
    A roof coating can decrease the home’s interior temperature by seven to ten degrees. A good quality roof coating reflects the ultraviolet and infrared sunlight away from your building which results in the natural cooling of the roof and reduction in the usage of air conditioner.

  2. Extends Roof’s Life
    A right roof coating protects the roof from sun rays and UV damage because it reflects the heat from the roof’s surface. This gives longevity to your roof and reduces the maintenance expenses.

  3. Used with a Wide Variety of Materials
    Roof coatings can be used with various types of materials used in roofing: asphalt, metal, composite, wood, galvanized metal,and other materials to make the roofing more concrete.

  4. Avoid Early Roof Replacement
    Before applying a roof coating, minor issues like small leaks and other minor damages are sorted out. If you choose the right coating, you might be able to avoid full-scale replacement of your roof for several years.

  5. Fade Resistance
    Since the roof coatings are reflective, the color of the roof is maintained for a longer duration, which makes your house look more appealing. Reflective roof coatings improve the overall look of your house.

Get a roof coating and extend the life of your roof! Consult an experienced roofing installation contractor for a better outcome.

About Applied Roofing Services

Applied Roofing Services is a full service roofing company located in CA. We offer durable and high quality residential and commercial flat roofing. We provide roof installation as well as roof repair services, roof maintenance and inspection services. We specialize in low slope roofs, energy efficient, zero maintenance, and green roofing. We have 20+ years of experience in the roofing industry.


9 Roof Remodeling Tips to Know Before Starting Renovation

Posted on February 8th, 2017 by Applied Roofing Services

The roof is the first thing people notice when they look at your house. There are chances that your roof can get damaged if you do not take proper care of it. You should always take care of your roof by keeping it in a good condition. A remodeling of your roof could be the best possible option to keep it going for years.

Normally, before you go for a roof remodeling, you have certain questions on your mind like-

  • How much budget will be required?
  • What materials are required?
  • Who can do the remodeling job better?

Roof Remodeling Tips

Here are 9 roof remodeling tips which you must know before starting the renovation work:

  1. Look and Style
    When you plan a remodeling of your roof, the look and style of the roof has to be impressive considering the average roof comprises 40 percent of a home’s visible exterior. A good looking roof simply increases the charm of your house.

  2. Inspection
    Inspect your roof using binoculars from a safe vantage point. Look for curling, cracking, missing shingles and areas which lack granular covering. You can observe your roof from inside as well. Use a flashlight to look for water stains that indicate a growing roof leak.

  3. Municipal Check
    You should check with your local municipal building department to check how many times it is possible to re-cover the existing roof with another layer of same materials. Some communities do allow more than two layers of roofing material but previous layer should be removed before installing the new one.

  4. Take a Picture
    Your contractor can take a digital picture of your house and show you the various renderings with different roofing materials.

  5. Detailed Proposal
    Your roofing contractor must send you a detailed proposal in which every small detail should be included such as the material type and its color, other materials to be used and the scope of work to be done, along with the deadlines for the project.

  6. Ventilation
    Go for attic ventilation to ensure a long and functional life for your roof. The ventilation requirement varies from place to place, the National Roofing Contractors Association normally recommends 1 square foot of free vent area for each 150 square feet of attic floor.

  7. Consider Roof an Annual Cost
    It will be better to consult three to four reputed contractors in your area for roof remodeling services and ask for an estimate and do not choose the lowest bidder. A roof is an important investment. Take annual roofing cost into consideration by dividing the total cost of the new roof by the life expectancy of the selected roofing material in years.

  8. Squares
    Roofing professionals often talk about squares which means the amount of shingles required to cover 100 square feet.

  9. Get Online Info
    Refer to the website of National Roofing Contractors Association which offers some useful resources to the homeowners such as roof check-up checklist, how to find quality roofing contractors and a database of contractors who can be searched through a ZIP code.

Follow these tips for a successful roof remodeling project and increase the value of your property.

Applied Roofing Services is a leading roofing contractor in Anaheim. Call us at (714) 632-8418 for quality and affordable roof remodeling services.

 

Get a Free Quote

About Applied Roofing Services

Applied Roofing Services is a full service roofing company located in CA. We offer durable and high quality residential and commercial flat roofing. We provide roof installation as well as roof repair services, roof maintenance and inspection services. We specialize in low slope roofs, energy efficient, zero maintenance, and green roofing. We have 20+ years of experience in the roofing industry.