Commercial Roof Repair: Where to Start?

Posted on February 28th, 2022 by Applied Roofing Services

Generally, a roof will last for at least ten years. However, some commercial roofs may need repairs or replacements ahead of time due to natural wear and tear, over-exposure to harsh elements, low-quality roofing materials used, and lack of maintenance.

When it is time to repair your roof, knowing what to do and where to start are essential to have successful roof repairs.

How to Prepare for a Commercial Roof Repair

Follow these steps to prepare for a commercial roof repair

  • Review Your State Building Rules

Every state has specific building codes that may require you to get legal consent before performing commercial roof repairs. To obtain a permit, you must specify the area to be restored and the type of repairs to be performed.

You must also be aware of laws that include special provisions. For example, a legal permit may not be required if the roof repair is intended to replace a few roof tiles or shingles. Therefore, check your state laws and act accordingly.

  • Call For a Roof Inspection

You can request a roofing contractor to perform an initial inspection to assess the repairs needed and prepare a proposal with estimated cost and timeline accordingly.

  • Get the Budget Approval

Forward the project proposal to your company’s board members and get approval from them. If you run a small/startup business, you can discuss with your accountant to determine how much you can afford for the project.

  • Schedule a Roof Repair

After getting the approval, schedule a commercial roof leak repair at a time most convenient for you. It is recommended to schedule a roof repair during summer and spring while avoiding winter and rainy seasons to mitigate the risk of accidents and delays.
Related: Commercial Roof Flashing: Types and Purpose You Should Know

How to Find a Reputable Roofing Contractor

You can compare contractors to contractors to settle with the one that provides high-quality services with a customized approach while ensuring warranties.

For finding a reputable contractor, you should consider

  • Experience and Expertise

Hire an experienced roofing contractor with a good performance track record. They know the correct methods to identify roof damage and will adhere to safety precautions and manufacturers’ recommendations while performing the job. You can also read their reviews and testimonials to learn about their expertise and customer service.

  • Warranties

Some roofing contractors will offer warranties for their roofing systems. This will prevent you from paying out-of-pocket for repairs and damages that occur within the warranty period.

  • Liability Insurance

Some contractors will come with liability insurance coverage to pay for the unfortunate injuries or property damage caused by you or your visitors because of their operations, tools/equipment, or employees.

If you are looking for the best commercial roof repair company in California, contact Applied Roofing Services today at 714-632-8418. You can also get a quote online for your commercial roofing project.

About Applied Roofing Services

Applied Roofing Services is a full service roofing company located in CA. We offer durable and high quality residential and commercial flat roofing. We provide roof installation as well as roof repair services, roof maintenance and inspection services. We specialize in low slope roofs, energy efficient, zero maintenance, and green roofing. We have 20+ years of experience in the roofing industry.


Commercial Roof Flashing: Types and Purpose You Should Know

Posted on January 7th, 2022 by Applied Roofing Services

Is your roof leaking? It could be because of the roofing system’s flashing failure. A damaged or insufficient flashing will make it difficult for your roof to repel the outside elements, thus causing leaks. Therefore, whether installing a roof or repairing the existing one, ensure the flashing is properly installed and compatible with your roof.

What Is Flashing on a Roof?

Flashing is a thin, metal material that directs water away from the roof’s critical areas including, chimneys, walls, vents, skylights, and roof valleys. It is usually installed everywhere the roof plane meets a vertical surface like a dormer or wall.

Commercial Roof Flashing Types

  • Continuous Flashing/Apron Flashing – A long, single metal piece that directs water down to the roof shingles.
  • Step Flashing – A rectangular flashing with a 90-degree bend in the middle is used to direct water away from the wall.
  • Base Flashing – Used as one of the flashings on chimneys, which require two flashings to ensure the rainwater always flows down to the gutter.
  • Counter Flashing – Installed against or above the base flashing to direct water away from the chimney.
  • Drip Edges – A thin metal flashing is installed on the roof’s edge to drip off the water, preventing leaks and damage to the home.

Also read: 5 Tips to Extend Your Commercial Roof’s Lifespan

Commercial Roof Flashing Materials

  • Copper Roof Flashing – This is malleable, highly durable, and usually found around chimneys.
  • Aluminum Flashing – It is an easy-to-form and lightweight flashing. However, aluminum needs to be coated when using it with concrete and masonry because plain aluminum can degrade when coming in contact with alkaline surfaces.
  • Steel Flashing – While increasing the aesthetic value of your roof, steel flashing is corrosion-resistant (when galvanized) and also malleable.

Roof Flashing Techniques

Plumbing Vent Boot Flashing

A cylindrical-shaped flashing is installed around the plumbing vent pipe to direct water to run around the vent.

Step Flashing

It is installed at the roof-wall intersection to keep water away from the wall.

Counter Flashing

It is used to seal chimneys and involves two flashing pieces:

  • Base flashing (first piece) – Installed around the chimney’s base.
  • Counter flashing (second piece) – Installed above the base flashing while embedded into the chimney’s masonry to ensure water does not flow behind the base flashing.

The Purpose of Roof Flashing

Roof flashing is required to protect buildings from water damage and leaks. Otherwise, water would gradually get into the roof-wall intersection and eventually into your building, causing significant damage.
Also read: 6 Reasons Why You Need Commercial Roof Cleaning

How Long Should Roof Flashing Last?

When installed properly, roof flashing can last up to 30 years. If you are looking for the best commercial roofing contractor in California, look no further than Applied Roofing Services. To get comprehensive commercial roofing solutions, contact us today at 714-632-8418 or request a quote online.

About Applied Roofing Services

Applied Roofing Services is a full service roofing company located in CA. We offer durable and high quality residential and commercial flat roofing. We provide roof installation as well as roof repair services, roof maintenance and inspection services. We specialize in low slope roofs, energy efficient, zero maintenance, and green roofing. We have 20+ years of experience in the roofing industry.


Commercial Roof Leak Repair: Important Facts You Should Know

Posted on October 12th, 2020 by Applied Roofing Services

Most commercial roofing systems can last up to 15-20 years. However, sometimes your commercial roof may also leak due to various reasons.

Commercial Roof Leak Repair

Why Is My Commercial Roof Leaking?

Improper roof installation is one of the main reasons behind commercial roof leaks. This will include improper installation of roof structures such as roof flashing, roof membrane, roof vents or chimney, etc. Falling trees, hail, or other objects can also cause significant damage to a roof and cause water leakage.

Signs of a Commercial Roof Leak

Here are the most common signs of a commercial roof leak.

  • Stained ceilings or walls
  • Visible damage to the roof flashings
  • Odor and mold problems in your facility
  • Formation of puddles and water dripping inside your building
  • Higher energy bills

Common Causes of Commercial Roof Leaks

Some of the major causes of commercial roof leaking are poor or no drainage, open penetrations, damaged roof flashings, improper sealing, damaged roof membranes, or an aging roof.

Also Read – 5 Reasons Why You Shouldn’t Ignore Commercial Roof Leaks

What to Do When Your Commercial Roof Is Leaking

1. The first thing you should remember if you find your commercial roof leaking is not to panic.
2. Now clear the area of people, supplies, and equipment so that you can reduce damage. Keep a bucket to keep the water from collecting on your floor.
3. If you have heavy objects that can’t be easily relocated, make sure to cover them with plastic to avoid water damage.
4. Locate the exact point of the leak and mark it. It would be best if you do this while it’s still raining as it would be difficult to mark these areas once your roof dries up.
5. Call a professional roof repairer to assess the damage and get your roof fixed as soon as possible.

Commercial Flat Roof Repair: The Alternative to Replacement

If a roof is leaking badly, it is better to repair it rather than replace the entire roof. For example, you can coat it with silicone, which will make it 100% waterproof and will also come with a warranty if installed by our professional roofing service.

Is a Leaking Roof Covered by Building Insurance?

Insurance coverage will largely depend on the nature of the leak. While most insurance providers will cover repair costs for leaks that were unavoidable, they will not cover the leaks caused by poor roof maintenance.

Call Your Commercial Roofing Contractor

If you are looking for the Commercial Roof Leak Repair near Orange County and Los Angeles for roofing replacement and repair, make sure to contact Applied Roofing Services today. You can call us at 714-632-8418 or get a quote online by visiting our website.

Also Read – Benefits of Commercial Re-roofing: What You Should Know

About Applied Roofing Services

Applied Roofing Services is a full service roofing company located in CA. We offer durable and high quality residential and commercial flat roofing. We provide roof installation as well as roof repair services, roof maintenance and inspection services. We specialize in low slope roofs, energy efficient, zero maintenance, and green roofing. We have 20+ years of experience in the roofing industry.


Friendly Roofing

How to protect your roofing investment by selecting the right roofing contractor?

Locations

APPLIED ROOFING SERVICES

Orange County Office:

1961 N. Main St.
Orange, CA. 92865
Phone: 714-632-8418 or
(800) 895-9589

Get Directions

Los Angeles Office:

1055 West 7th Street
33rd Floor Penthouse
Los Angeles, CA 90017
Phone: 213-255-3677

Get Directions

 

San Bernardino Office:

8333 Foothill Blvd
PMB # 411
Rancho Cucamonga CA 91730
Phone: 909-361-6119

Get Directions

e-brochure

Need To Know More?
Download our E-Brochure

Customer Review...

ARS has been my only foam roofing contractor nearly 15 years. There service is excellent and price competitive. I would recommend them highly

Dave A
ESRI

crrc energystar bbb bestroof